The main perk of using a Ryobi nailer is it’s an all-rounder nailer on an affordable budget. As it costs less than many other brands in the market, many customers often get themselves towards purchasing Ryobi tools. However, the problem isn’t that. Ryobi nailers have some severe problems regarding the firing issue. They often refuse to fire. It creates an absolute disturbance to the user. But no worries, mate. Stop questioning yourself why won’t my Ryobi nail gun fire because in this article I’m going to tell you the solution to that very problem. I believe that if you can go through the end of this article with your full concentration, you’ll indeed be delivered with some live-saving stuff.
Table of Contents
How Does Ryobi Nail Gun Works
Well, I will direct you in terms of the fix. But let me tell you some backstory first. If you don’t clear your concept about the mechanism of the nailer, you might mess up stuff while fixing the tool. For this, I will now elaborate on the working procedure of the Ryobi nail gun.
Apparently, the mechanism isn’t that complicated. There are a total of two parts to the gun. One is the body and the other is the magazine where the nail gets stored. These two portions are joined with some small screws. However, in between the joint of the body and the magazine, a firing pan is located which moves backwards when the trigger is pulled. During this incident, the adjacent nail gets its required velocity to penetrate through what’s in front. There’s that.
Why My Ryobi Nail Gun isn’t Working?
Don’t get me wrong, fella. I will tell you the fixes very soon but if you don’t know why this problem occurs, fixing it will get problematic for you. This is why in this portion I will direct you to all those possible reasons behind why your Ryobi stopped working out of nowhere. Let’s get started; what say?
Having Degraded Batteries
If the power source somehow gets stained, expecting good performance out of the nailer is surely a frivolity. All you can do is, replace the battery with a new one. Otherwise, this problem won’t get solved, ever.
Dust in the Joint
As you already know that the two parts of the nailer (body and magazine) get joined via a point from which you can separate it. However, if dust forms in this very place, the nails will get enough counter check in terms of getting out of the gun. This will result in some very serious problems.
Before separating the two parts, if you can adequately clean this joint, the problem might have been solved. However, if this isn’t, then the problem occurred with your firing pan. That’s entirely a different issue.
Jammed Firing Pan
Due to the adequate lubrication, the firing pan located inside of the nailers’ body could get jammed. However, this is one of the superior fixes you can apply all the way to your Ryobi. And this is the verge step of the fix. If this doesn’t work out, your nailer might have gone over already.
The pan gets jammed due for an extensive amount of reasons. A piston is located at the end of the pan. If you fail to apply enough lube to the pan, the piston will also get jammed. This will create disturbance and the nail won’t get out of the nailer no matter how passionately you try.
Jammed Piston
This is the worst-case scenario, by the way. If the piston gets jammed, you can’t really fix the issue by applying lube from upward. In that case, you must need to disassociate the entire nailer and take care of the piston. In some scenarios, you might also need to replace the piston with an entirely new one.
However, no matter what you endure from above, I tried to talk about all possible fixes in the next portion. Hope it will help you enormously. Let’s get onto this without having further ado…
What You’ll Need?
You don’t need high-intensity tools for repairing this issue. Apparently, using some homely tools will surely get you rid of this. However, here’s to the stuff that you’ll require-
- Lubricator
- Cleaning Brush
- Screw Driver
- Safety Goggles (Not mandatory but highly recommended)
If you have all these ingredients in your hand, you’ll be lucky enough to start the fix.
Fixing a Ryobi Nail Gun that Won’t Fire
Let’s get directly into it. If you’re new to all these fixings, firstly I would let you know that maintaining safety precautions is always mandatory here. Implies, putting the goggles on and always having rigid gloves in the hand. Otherwise, an accident could have happened at any moment. A pseudo accident can ruin your life from every possible angle. So, it’s a small request from the author to maintain all the safety precautions before jumping into the plane.
Nonetheless, maintain the steps illustrated down below to fix your Ryobi nail gun won’t fire problem–
- Remove the Battery and The Nails from Magazine
It’s a very vital and crucial step. Before starting the fix, you must have removed all the power sources from the nailer. Otherwise, any type of accident might happen. You must be wondering why you need to clear the nails from the magazine, right? Well, if you don’t remove the nails and somehow pull the trigger mistakenly, nails can directly penetrate through your body. Who wants to get sored by this, tell me?
- Remove the Magazine Itself
As the main body is joined with the magazine and the firing pan is located in the middle of the joint, you won’t be able to access the pan without separating the magazine from the nailers’ body. This is why you must disassociate the magazine from the body. Just take the screwdriver in your hand and pull off all the screws that are involved in joining the two parts. After the end of this operation, you’ll see a small bar-like thing peep towards you.
It’s a quick fix by the way- apply some lube on the join before disassociating the two parts. If the problem is not too chronic, it will get solved by this.
- Accessing the Firing Pan
The peeped firing pan you discovered in the previous step is basically a long bar that could be moveable at 360 degrees. And at the end of the bar, there’s a piston connected which gives reciprocating motion to the bar.
However, take the lube and apply an adequate amount of lubricant to the void of the firing pan. Use your hand and pull the bar twice and thrice. It might not be easy to pull in the first place. But after pulling a certain amount of time, the thing will get easy and once it’s done, you’re now all set.
- Give a Trial
Now, the problem is halfway solved. Connect the battery with the nailers’ body and pull out the trigger. The tool must act gently now. If it isn’t, you might need to replace the firing pan or even the batteries themselves. That’s a worst-case scenario though. I don’t want it to happen with you, fella.
Nonetheless, your Ryobi is now almost on the shore to get it going. Associate all the parts and start nailing at its best. All the best wishes to you.
FAQs
What nails can you use in the Ryobi nail gun?
Ans: Experts always suggest using the 8d nails in all these semi-professional nail guns. However, consulting with the manufacturer will give you a massive ride getting the answer to this question. And a quick suggestion from my end- make sure to use stainless steel nails in your nailer. In this way, you will bargain no matter what’s the scenario and the concern.
Is this mandatory to put on goggles while repairing nailers?
Ans: No, it’s not mandatory at all. But it’s recommended by all the professionals. If you don’t adhere to this ground rule, you might get injured which will be detrimental from every possible angle.
Which lube can I apply for repairing my Ryobi?
Ans: You can use literally any kind of lube near your hand. However, experts suggest using the 3-in One Lubricant as it’s a very good grade in terms of lubricating mechanical parts. So, you can indeed give this a try if you’re on the verge of repairing your Ryobi.
Conclusion
We’ve conquered the very topic and now it’s the farewell time, mate. I hope you have had the best possible fix reading this article. If anything still seems spiny to you, kindly give this article one more read and get everything clear like crystal.
Happy Nailing, Mate.
No matter what, never stop trying!